Remflex Exhaust Header / Manifold Gaskets
Help / FAQ
PN 18-009 -- Turbo - "Precision Turbo" 63 MM Outlet Gasket, 4 Bolt Holes with 2-9/16" Diameter Outlet Hole, 1(ea)
Usually Ships in 24 Hours
"Precision Turbo" 63 MM Outlet Gasket
4 Bolt Holes with 2-9/16" Diameter Outlet Hole
INSTALLATION TIPS: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
Questions? 1-866-641-SEAL (7325) email@example.com
Torque: 20 Ft Lbs
PN 18-007 -- Turbo - HKS 50mm, Waste-Gate Inlet Gasket, 1-3/4" Diameter Port, 4 Bolt Holes with Bolt Spacing: (A) 2-21/32" x (B) 1-3/4", 1(ea)
PN 18-003 -- Turbo - Garrett, Greddy T25, Turbo Inlet Mounting Flange Gasket, 2-1/16" x 1-5/8" Square Port, 4 Bolt Holes with Bolt Spacing: (A) 1.562" x (B) 3.875", 1(ea)
PN GKO2-SB -- SUBARU - INTERCOOLER GASKET KIT - L4, 2.0L Turbo ('02 & Up), 2.5L Turbo ('04 & Up)- Contents: PN 16-010 Y-Pipe Gskt (2ea), PN 16-072 Air Bypass (Blow Off Valve) Gskt (1ea), 3 Pieces Total
PN 18-013 -- Turbo - T-3 Internal Wastegate Eliminator Flange, Turbo-to-Downpipe, 2-1/4" Round Port - Irregular Shape, 4 Bolt Holes with Spacing: (A) 3-1/2" x (B) 3-1/2" x (C) 3-13/16" x (D) 3-5/8", 1(ea)
PN 13-011 -- Buick Turbo-to-Down Pipe Gasket, V6 - 3.8L Engine Code "7" ('86-'87), 1(ea)
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item: