Home > Collector / Flange Gaskets > 2 Bolt >

PN 8070 - 2-1/2" Pipe, 2 Elongated Bolt Holes with 3-1/2" to 4-1/4" Bolt Spacing, 2/Set
PN 8070 - 2-1/2" Pipe, 2 Elongated Bolt Holes with 3-1/2" to 4-1/4" Bolt Spacing, 2/Set
 
MSRP $22.35


Availability:: Usually Ships in 24 Hours
Product Code: 8070

Description Additional Informaion Installation Tips
 
2-1/2" Pipe
2 Elongated Bolt Holes with 3-1/2" to 4-1/4" Bolt Hole Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.

Slotted or Elongated Bolt Holes provide a range of Bolt Center-to-Bolt Center measurements to fit your particular application.
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 6029 - MOPAR - L4 - DOHC, Chrysler Car / Dodge Truck, 2.0L ('02-'04), 2.4L ('01-'07), 2.4L Turbo ('03-'07), Jeep 2.4L/148 ('02-'06), 1-7/8"w x 1"h Square Port, 1(ea) $41.99
PN 8050 - Fujitsubo 3-Bolt Import Header Flange Gasket, Dual 4-Into-2 / 2-Into-1, 1-7/8" Ports, 2/Set $26.76
PN 8082 - UNIV - 2-3/4" 2-Bolt Collector Flange Gasket; (2) each 1/2" Bolt Holes with 4-1/2" Bolt Spacing, 2/Set $22.35
PN 6015B - MOPAR V8, 318, 340, 360 "W-2" Cylinder Head OUTER (Adaptor Plate Gasket "Hedman" Pattern), 2/Set (Inner Gasket See: 6015) $59.10
PN 3052 - Ford - V8, Windsor Small Block Single Port Gasket, 1-3/8 X 1-5/8 W/ 2" Bolt Spacing, 8/Set $49.34
PN 6007 - Mopar, V10, 8.0L/488ci ('94-'03) Truck Engine, 2/Set $59.10
PN 6026 - MOPAR V8-Magnum 360/5.9L "SpinTech" Header Adaptor Plate Gasket, 2/Set $55.64
PN 8077 - 2-1/2” Collector Flange, 3 Bolt Holes, 3" Bolt-Center to Bolt-Center, DOUG THORLEY SPECIFIC, 2/Set $20.99
PN 7017 - Toyota - L4, "3R" Series, 1.9L/1897cc ('60-'68), Intake & Exhaust Manifold Set (Intake-to-Exhaust Gasket Included), 2 Pc Set $59.10