Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 3081 - Ford - V8, Small Block Windsor 289/302/351 Fits: Doug Thorley Headers®, 2" Bolt Hole Spacing, 1-5/16" x 1-5/8" Rectangular Port 2/Set $41.78
PN 8084 - UNIVERSAL REMFLEX® 2-15/16" 3 Bolt Flange Gasket 2-15/16" Port with 3(ea) 11/32" Bolt Holes on a 3-7/32" Bolt Spacing 2 Each $24.66
PN 2074 - Chevrolet, V8BIG BLOCK CHEVY BRODIX® PATTERN FITS: PB 2005 & PB 1200 "MAN EATER" SERIES HEADS MATCHES BRODIX GASKET MG 2005 2/Set $51.02
PN 8007 - 3" Pipe Flange, 2 Slotted Bolt Holes, 4" to 4-3/8" Bolt Hole Spacing, 1(ea) $12.59
PN 3015 - Ford, FE Engines, 332 ('58-'59), 352 Car ('58-'65) 352 Jeep ('59), 390 ('61-'65) (Except T-Bird '61-64) / 427 Mid-Riser ('66-'67), 428 ('66-'70), 1-3/8"w x 1-7/8"h Square Port, Manifold or Headers, 2/Set $58.26
PN 1001 - AMC (Jeep), 304 ('70-'79), 360 ('70-'93), 390 ('70), 401 ('71-'76), 2/Set $50.70
PN 2036 - Chevrolet, Big Block, 396, 402, 427, 454, Round Port, Header Applications, 2/Set $51.02
PN 2064 - GM V8 "Husler" Header SBC "360" Sprint Car, Stahl 7-Bolt Pattern, 6/Set $50.70