Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 3002 - Ford, L4 - 2.3L/140ci Including Turbo ('74-'93), Headers Only, 1(ea) $34.64
PN 2010 - Chevrolet, 262/4.3L ('85-'95), 2/Set $37.05
PN 3015 - Ford, FE Engines, 332 ('58-'59), 352 Car ('58-'65) 352 Jeep ('59), 390 ('61-'65) (Except T-Bird '61-64) / 427 Mid-Riser ('66-'67), 428 ('66-'70), 1-3/8"w x 1-7/8"h Square Port, Manifold or Headers, 2/Set $58.26
PN 6009 - Mopar V8 - 318 ('75-'91), 340 ('68-'73), 360 ('71-'92), Includes 2 Air Tube Gaskets, 1-3/16" x 1-27/32" Sq End Ports, Header & Manifold Applications, 2/Set $52.49
PN 8050 - Fujitsubo 3-Bolt Import Header Flange Gasket, Dual 4-Into-2 / 2-Into-1, 1-7/8" Ports, 2/Set $26.76
PN 8016 - 2" Pipe, 2 Slotted Bolt Holes, 3" to 3-1/2" Bolt Hole Spacing, 2/Set $17.84
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set $17.84
PN 18-024 - Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.750"w x 2.250"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea) $20.46
PN 3033 - Ford, V6, 4.0L ('97-'11) SOHC, 2/Set $37.58