Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 6038 - MOPAR V8, Magnum 318/5.2L ('92-'02), 360/5.9L ('93 & Newer), Matches Doug Thorley® Header Flange Gasket Jeep 5.2 - 5.9L Part# 07-31-48335/A, 2/Set $50.39
PN 8045 - 1-7/8" Pipe, 2 (13/32") Bolt Holes, 3-1/4" Bolt Spacing, 2/Set $20.99
PN 6014 - Mopar 8.0L ('96-'07) Viper 2/set $59.10
PN 8080 - UNIV - 7/8" Port, w/ 2-Bolt Flange Gasket, 2 (17/64") Bolt Holes with 1-29/32" Bolt Spacing, 2/Set $22.04
PN 6009 - Mopar V8 - 318 ('75-'91), 340 ('68-'73), 360 ('71-'92), Includes 2 Air Tube Gaskets, 1-3/16" x 1-27/32" Sq End Ports, Header & Manifold Applications, 2/Set $52.49
PN 3088 - Ford - V8 6.2L F150 Raptor ('10-'14), F250/F350/F450 SUPERDUTY ('11+), 1-11/16" Tall x 1-13/16" Tall Square Port, 2/Set $52.49
PN 3071 - Ford, V8 - 429 BOSS (All Years), 2"w x 2-1/16"h Rectangular Port, Header Applications, 2/Set $52.49
PN 2088 - GM - Inline Six Cylinder Special Australian Aftermarket "Debbie Doogan" Style Aluminum Head, Intake/Exhaust Gasket Set: EXHAUST - Part "A" 3 Pieces 1/8" Thk: INTAKE - Part "B" $65.61