Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 3015 - Ford, FE Engines, 332 ('58-'59), 352 Car ('58-'65) 352 Jeep ('59), 390 ('61-'65) (Except T-Bird '61-64) / 427 Mid-Riser ('66-'67), 428 ('66-'70), 1-3/8"w x 1-7/8"h Square Port, Manifold or Headers, 2/Set $58.26
PN 8006 - 3" Pipe Flange, 2 Bolt Holes, 4-1/8" Bolt Hole Spacing, 1(ea) $12.59
PN 6003 - Mopar 318/5.2L, 360/5.9L ('68-'92),(Pre-Magnum), Header Applications, 2/set $52.49
PN 3028 - Ford, V8 289 / 302 / 351 Windsor,(For Aftermarket Cylinder Heads - Fits GT40) Large Square Port, 2" Bolt Hole Spacing, Header Applications, 2/Set $40.52
PN 3036 - Ford, V8, 427 Hemi "Cammer" ('67-'69) SOHC , 2/Set $55.64
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set $17.84
PN 3074 - Ford - V8, Windsor Small Block J302 Head 1-15/32 Wide X 1-15/32 Tall Port, W/ 2-7/16" Diagonal Bolt Spacing 2/SET $43.46
PN 8031 - 2-5/8" Pipe, 3 Bolt Holes, 4-1/2" Bolt Hole Spacing, 2/Set $25.61
PN 8022 - 2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $16.79