Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 3012 - Ford, V8 - 351M (Modified) /400 ('75-'82), Manifold or Headers, 2/Set $51.02
PN 8074 - UNIVERSAL REMFLEX® 2 Bolt Flange Gasket 1-3/4" Pipe Size 2-9/16" Center to Center Bolt Spacing 2/Set $17.84
PN 8083 - UNIVERSAL REMFLEX® 2-3/4" 2 Bolt Flange Gasket 2-3/4" Port with 2(ea) 1/2" Bolt Holes on a 4-5/8" Bolt Spacing 2 Each $22.35
PN 3086 - FORD V8 REMFLEX® FE Header Gasket Fits: Hooker Header Part # 6903-HKR Weld Bead Headers Port Size: 1-1/4" Wide x 1-3/4" Tall 2/Set $59.10
PN 3064 - Ford - V8, "A.C.T.", Small Block Windsor, 1-5/16"w x 1-11/16"h Square Port, Headers, 2/Set $41.78
PN 2085 - GM V8 Small Block Fits: Tall Raised Port Aftermarket Heads, 1-5/16" Wide x 1-7/8" Tall "Raised" 3/16" above bolt line, 2/Set $49.34
8067 - 1" Pipe, 2 Bolt Connector Gasket, 2 (1/4") Bolt Holes with 1-3/4" Bolt Spacing, 2/Set $17.84
PN 3011 - Ford, 429 ('68-'73) (Including Cobra Jet, Super Cobra Jet), 460 ('68-'78) (Including HI-Performance), Manifold or Headers, 2/Set $47.97
PN 8001 - 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set $19.94