Home > Collector / Flange Gaskets > 2 Bolt >

PN 8051 - 1-7/16" Pipe, 2-Bolt Flange Gasket, 2-1/4" Bolt Spacing, 2/Set
PN 8051 - 1-7/16" Pipe, 2-Bolt Flange Gasket, 2-1/4" Bolt Spacing, 2/Set
 
1-7/8", 2-Bolt Pipe Flange Connector Gasket
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8051

Description Additional Informaion Installation Tips
 
1-7/16" Hole Diameter
2-Bolt Holes with 2-1/4" Bolt Hole Spacing
3" overall length x 2-3/16" top-to-bottom
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 7009D - Toyota Land Cruiser, Heat Riser Gaskets, 3.9L "F" ('69-'74), 2/Set $26.24
PN 6036 - Mopar, V8, 426 Hemi ('64-'71), Special 10-Bolt Pattern, Rectangular Port Header Gasket, 2/Set $54.59
PN 2085 - GM V8 Small Block Fits: Tall Raised Port Aftermarket Heads, 1-5/16" Wide x 1-7/8" Tall "Raised" 3/16" above bolt line, 2/Set $49.34
PN 8055 - 3-1/2" Port, 2-Bolt Flange Connector Gasket, 2 (1/2") Bolt Holes with 4-1/2" Spacing, 2/Set $24.66
PN 8049 - Hooker Headers 4-Bolt, 4-Into-1 Connector Flange Gasket, 1-7/8" Pipe with 4 (3/8") Holes, 4-3/8" Bolt Spacing, 2/Set $26.76
PN 13-005 - BUICK, V8, OHV, 350 ('68-'81), 1-5/16"w x 2-1/16"h Square Port, Manifold or Headers, 2/Set $51.44
PN 8085 - UNIVERSAL REMFLEX® 1-1/4" 2 Bolt Flange Gasket 1-1/4" Port with 2(ea) 5/16" Bolt Holes on a 2-1/4" Bolt Spacing 2 Each $17.84
PN 18-021--Turbo - Basic T-6 Inlet Gasket, Divided Plenum with two 1.875"w x 2.315"h Ports, 4 Bolt Holes with Bolt Spacing: (A) 2.75" x (B) 4.375", 1(ea) $25.19