Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 53-008 - Honda L4 - DOHC, 2.0L/1998cc ('05-'09) 2.4L/2354cc ('03-'09) $36.74
PN 3019 - Ford, 4.6L DOHC ('93-'04), Cobra, Mustang & Mach 1 ('96-'04), Lincoln ('93-'04), Oval Port, Headers, 2/Set $47.97
PN 2038 - Chevrolet, Small Block, Large "Oval" Port for "Husler Hedders", 2/Set $49.02
PN 3082 - Ford, V8 REMFLEX®, 460 FUEL INJECTED, SMALLER IRREGULAR SHAPED PORT, Fits only vehicles in the 1990-1992 Year Range, 2/Set $49.02
PN 12-006 - PONTIAC, V8 "All Pontiac® Tiger Head" Ram Air IV® Header Gasket Slotted Bolt Holes on (2) Center Bolts, 2" Round Port 2/Set $52.49
PN 3074 - Ford - V8, Windsor Small Block J302 Head 1-15/32 Wide X 1-15/32 Tall Port, W/ 2-7/16" Diagonal Bolt Spacing 2/SET $43.46
PN 8033 - 3-HOLE HEADER DOWN PIPE, with (3) 1-7/16" Holes,and 3 Bolt Holes, 2/Set $26.76
PN 3061 - Ford - L6, 2.4L/144 ('60-'64), 2.8L/170 ('60-'72), 3.3L/200 ('63-'83), 4.1L/250 ('69-'80), Header Applications Only, 1(ea) $58.26
PN 18-006 - TURBO - Garrett, Greddy T4 - Turbo Inlet / Up-Pipe 4 Bolt Gasket, 3" x 2" Square (Open Plenum), 4 Elongated Bolt Holes with Bolt Spacing: (A) 3-1/4" x (B) 2-3/4", 1(ea) $18.89