Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 7007 - Toyota V6 -OHV 3.4L "5VZFE" ('95-'04), 1-25/32" Dia. Round Port, Header & Manifold Applictions, 2/Set $39.89
PN 6037 - Mopar, V8, Hemi 426, 472, 528 ci, For TTI® Headers, 2.00" Wide x 1.90 Tall Rectangular Port, 10-Bolt Pattern, Header Gasket, 2/Set $51.02
PN 8010 - 2-5/16" Pipe Flange, 2 Bolt Holes, 4-3/32" Bolt Hole Spacing, 2/Set $18.89
PN 3080 - FORD L6 Remflex® 4.9L 300 Cubic Inch Intake and Exhaust Manifold Gasket Fits: Bronco ('87-'92), Econoline Series & F Series-150,250,350 ('87-'96) (Includes #3005B Riser Gasket) 2 Piece Set $59.10
PN 8016 - 2" Pipe, 2 Slotted Bolt Holes, 3" to 3-1/2" Bolt Hole Spacing, 2/Set $17.84
PN 6029 - MOPAR - L4 - DOHC, Chrysler Car / Dodge Truck, 2.0L ('02-'04), 2.4L ('01-'07), 2.4L Turbo ('03-'07), Jeep 2.4L/148 ('02-'06), 1-7/8"w x 1"h Square Port, 1(ea) $41.99
PN 8003 - 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set $22.04
PN 5001 - International 266ci ('67-'80), 304ci ('59-'80), 345ci ('59-'82), 392ci ('69-'82) 2/set $45.14
PN 2004 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Round Port, for Header Applications, 2/Set $41.78