Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 3036 - Ford, V8, 427 Hemi "Cammer" ('67-'69) SOHC , 2/Set $55.64
PN 3064 - Ford - V8, "A.C.T.", Small Block Windsor, 1-5/16"w x 1-11/16"h Square Port, Headers, 2/Set $41.78
PN 8044 - 2-5/32" Pipe, 2 (13/32") Bolt Holes, 3-3/4" Bolt Spacing, 2/Set $20.99
PN 3035 - Ford, 289, 302, 351 Windsor, Fits Cylinder Heads with 3" Bolt Spacing on each port - "Dart, Canfield, ProTop Cylinder Heads" , Header Applications, 2/Set $47.55
PN 3085 - FORD DIESEL REMFLEX® INLINE 6 FORD DIESEL ENGINE MODEL # 2725E 2 Piece Set $64.35
PN 8065 - 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $29.39
PN 3069 - FORD V8, 5.0L Coyote Engine (2011+),1-13/16" Round Port, Header Applications Only, 2/Set $49.02
PN 2062 - GM V8 Small Block Fits: Dart "Little Chief" Heads, 2" Port Size 2/Set $51.75
PN 2076 - Chevrolet, Small Block, OVAL PORT HEADER GASKET DIM: 1-27/32" WIDE X 1-19/32" TALL FITS: CFE SBX 4.5" BORE CENTERS 3.020" DIAGONAL BOLT SPACING INDIVIDUAL PORT 8 Piece Set $50.70