Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


8067 - 1" Pipe, 2 Bolt Connector Gasket, 2 (1/4") Bolt Holes with 1-3/4" Bolt Spacing, 2/Set $17.84
PN 6003 - Mopar 318/5.2L, 360/5.9L ('68-'92),(Pre-Magnum), Header Applications, 2/set $52.49
PN 2091 - GMC V6 305 CUBIC INCH ENGINE 1960-1969 1-9/16" x 1-7/16" Square Port w/ 3-3/16" Bolt Hole Spacing 6 Piece Set $38.10
PN 7003 - Toyota 2.2L "20R", 2.4L "22R" ('75-'84), 7 Piece EGR" and "AIR TUBE" Gasket Assortment Included, Header & Manifold Applications, 8 Piece Set, $48.29
PN 3030 - Ford, V6, DOHC Duratec,2.5L ('95-'05), 3.0L ('95-'12), Header & Manifold Applications, 2/Set $40.52
PN 6047 - MOPAR Brodix B1 Indy 572 Ports 2/Set $66.14
PN 2054 - Chevrolet GM, L4, 2.5L/153 OHV L4, Intake and Exhaust Gasket, (Includes Heat Riser Gasket), 2 Piece Set $51.12
PN 8080 - UNIV - 7/8" Port, w/ 2-Bolt Flange Gasket, 2 (17/64") Bolt Holes with 1-29/32" Bolt Spacing, 2/Set $22.04
PN 6036 - Mopar, V8, 426 Hemi ('64-'71), Special 10-Bolt Pattern, Rectangular Port Header Gasket, 2/Set $54.59