Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 6008 - Mopar Slant 6, 170 (Car '60-'71)(Truck '60-'69), 198 (Car '70-'74)(Truck '70-'73), 225 (Car '60-'83)(Truck '60-'87), Includes Riser Gasket, 2 Piece Set $60.15
PN 2082 - Chevrolet/GM - BIG BLOCK PRO-COMP®, Header Gasket, Port Size: 1.875 HT x 2.187 WD, Fits: Pro Comp® Cylinder Heads, 2/Set $51.02
PN 8015 - 2-1/4" Collector, 3 Bolt Holes, 3-7/16" Bolt Hole Spacing, 2/Set $20.25
PN 8062 - Ford V8 Flathead Exhaust Pipe (1-3/4" Hole Size), 2 Bolt Connector Flange Gasket with 2-3/4" Bolt Spacing, 2/Set $22.04
PN 6034 - MOPAR/PLYMOUTH - L4 - Inline 4 Cylinder, 198ci (1932 Model Year) Intake/Exhaust Manifold Gasket, 1(ea) $52.49
PN 8070 - 2-1/2" Pipe, 2 Elongated Bolt Holes with 3-1/2" to 4-1/4" Bolt Spacing, 2/Set $22.35
PN 8065 - 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $29.39
PN 3069 - FORD V8, 5.0L Coyote Engine (2011+),1-13/16" Round Port, Header Applications Only, 2/Set $49.02
PN 18-024 - Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.750"w x 2.250"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea) $20.46