Home > Collector / Flange Gaskets > 2 Bolt >

PN 8055 - 3-1/2" Port, 2-Bolt Flange Connector Gasket, 2 (1/2") Bolt Holes with 4-1/2" Spacing, 2/Set
PN 8055 - 3-1/2" Port, 2-Bolt Flange Connector Gasket, 2 (1/2") Bolt Holes with 4-1/2" Spacing, 2/Set
 
Alternative Views:
2-Bolt Flange Connector Gasket
1/2" Bolt Holes
MSRP $24.66


Availability:: Usually Ships in 24 Hours
Product Code: 8055

Description Additional Informaion Installation Tips
 
Universal
REMFLEX®
3-1/2" Port
2-Bolt Flange Connector Gasket
2 (1/2") Bolt Holes with 4-1/2" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 45-450 - V-Band Clamp Gasket 4.50" Dim: 4.53 ID x 5.24 OD x .060 Thick 2/Set $19.41
PN 58-002 - Mazda, Triple Rotor Rotary Engine, "13G" & "20B", 3/SET $43.56
PN 15-014 - NISSAN - L6, 280Z 2.8L - L28E, L28ET ('79-'83), Datsun 810 2.4L-2.8L - L24E, LD28 ('80-'84) 1/EACH $25.19
PN 12-003 - PONTIAC, L4, OHV, 2.5L / 151 ('77-'79) Except Cross Flow, Intake-to-Exhaust Gasket Included, 2 Piece Set $49.34
PN 15-007 - NISSAN, 280 ZX - Turbo Outlet Flange Gasket, L6 - 2.8L "L28ET" ('81-'83), 1(ea) $25.19
PN 15-001 - NISSAN, L4, SOHC - 1.6L/1595cc "L16" ('68-'73), 1.8L/1770cc "L18" ('73-'74), 2.0L/1952cc "L20B" ('74-'76), 1-1/4"w x 1-9/16"h Square End Ports, Includes Riser Gaskets, (Head Side Marked), 3 Piece Set $59.10
PN 18-006 - TURBO - Garrett, Greddy T4 - Turbo Inlet / Up-Pipe 4 Bolt Gasket, 3" x 2" Square (Open Plenum), 4 Elongated Bolt Holes with Bolt Spacing: (A) 3-1/4" x (B) 2-3/4", 1(ea) $18.89
PN 45-225 - V-Band Clamp Gasket 2.25" Dim: 2.28 ID x 2.99 OD x .060 Thick 2/Set $15.74
PN 7022 - Toyota L4 - 2.4L "2RZFE" ('95-'04), 2.7L "3RZFE" ('94-'04), 1-5/8" Round Port, Doug Thorley Header Pattern, 1(ea) $31.49