Home > Turbo Gaskets >

PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
 
"TE-45" (TE-63E) Turbo-to-Downpipe
MSRP $26.76


Availability:: Usually Ships in 24 Hours
Product Code: 18-015

Description Additional Informaion Installation Tips
 
Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe
4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3"
1(ea)

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Turbo Gaskets
Turbo Gaskets > Turbo Down Pipe


PN 4003 - Diesel - 6 Cylinder Turbo Diesel Pulling Tractor Header Gasket, 6 Piece Set $59.10
PN 18-027 - GARRETT TURBO, Fits: GBT1756, GTB2056, GTB2260, 2 Piece Set $39.36
PN 11-002 - OLDSMOBILE, 260 Incl Diesel ('75-'82), 307 ('80-'84, Some '85-'90), 330 ('64-'67), 350 Incl Diesel ('68-'85), 403 ('77-'79), 455 ('75-'76), Manifold Applications, 2/Set $50.39
PN 54-001 - Mitsubishi - L4, SOHC & DOHC - 1.6L ('89-'95), 1.8L ('93-'95), 2.0L ('89-'99), 2.4L ('93-'06), (Chrysler, Hyundai, Kia, and Mitsubishi Applications), 1(ea) $36.74
PN 22-001- Marine Exhaust Gasket - 3" ID x 5" OD With (4) Bolt Holes on a 4-1/8" Bolt Circle, 2/Set $32.54
PN 45-275 - V-Band Clamp Gasket 2.75" Dim: 2.78 ID x 3.49 OD x .060 Thick 2/Set $15.74
PN 18-023 - Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.830"w x 2.350"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea) $20.46
PN 25-001 - Opel,Vauxall,Holden L4, 1.5-2.0L "CIH" (68-89), 1(ea) $51.44
PN 45-300 - V-Band Clamp Gasket 3.00" Dim: 3.03 ID x 3.74 OD x .060 Thick 2/Set $16.16