Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 7013 - Toyota, V6, 3.4L "5VZFE" ('95-'04) TRD Header Gasket Set, Part A: 7 Pieces, Part B: 3 Pieces, 10 Pieces Total $48.29
PN 8064 - 3-7/8" Hole Size, 4-Bolt Connector Gasket, (Lemon Header Pattern), 3-7/16" Bolt Hole Spacing, 2/Set $26.76
PN 8085 - UNIVERSAL REMFLEX® 1-1/4" 2 Bolt Flange Gasket 1-1/4" Port with 2(ea) 5/16" Bolt Holes on a 2-1/4" Bolt Spacing 2 Each $17.84
PN 8065 - 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $29.39
PN 2086 - GM V8 Small Block Fits: AFR SBC HEADS AFR GASKET #6905 PORT SIZE: 1.60" WIDE X 1.50" TALL 2/Set $51.02
PN 2037 - Chevrolet, Small Block, "18 Degree Head", Header Applications, 2/Set $49.02
PN 3090 - FORD REMFLEX® HD Trick Flow 460 Large "D" Port Port Size: 1-3/4" Wide x 2-3/16" Tall, 2/Set $55.64
PN 8080 - UNIV - 7/8" Port, w/ 2-Bolt Flange Gasket, 2 (17/64") Bolt Holes with 1-29/32" Bolt Spacing, 2/Set $22.04
PN 3086 - FORD V8 REMFLEX® FE Header Gasket Fits: Hooker Header Part # 6903-HKR Weld Bead Headers Port Size: 1-1/4" Wide x 1-3/4" Tall 2/Set $59.10