Home > Turbo Gaskets >

PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
 
"TE-45" (TE-63E) Turbo-to-Downpipe
MSRP $26.76


Availability:: Usually Ships in 24 Hours
Product Code: 18-015

Description Additional Informaion Installation Tips
 
Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe
4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3"
1(ea)

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Turbo Gaskets
Turbo Gaskets > Turbo Down Pipe


PN 16-180 - SUBARU, 2.0L Turbo "205" ('02 & Newer), 2.5L Turbo "255 & 257" ('04 & Newer), Turbo to Down-Pipe Gasket, 1(ea) $27.29
PN 26-001 - 1.2L/1198cc (Austin '54-'57)(Metro. '54-'55), 1.5L/1489cc (Austin '54-'61)(Metro. '56-'62)(MG '54-'79)(Morris '54-'61), 1.6L/1588 & 1622cc (Austin '61-'66)(MG '59-'68)(Morris '61-'71), 1.8L/1798cc (Austin '72-'77)(MG '61-'80), 1(ea) $59.10
PN 10-003 - JEEP (AMC), 232 / 3.8L ('65-'79), 258 / 4.2L ('71-'90), (Intake to Exhaust Gasket Included) 2 Pc Set $61.94
PN 45-250 - V-Band Clamp Gasket 2.50" Dim: 2.53 ID x 3.24 OD x .060 Thick 2/Set $15.74
PN 13-003 - BUICK, V6, 196, 231, 252 "Stage II Engines", 2/Set $38.10
PN 58-002 - Mazda, Triple Rotor Rotary Engine, "13G" & "20B", 3/SET $43.56
PN 45-225 - V-Band Clamp Gasket 2.25" Dim: 2.28 ID x 2.99 OD x .060 Thick 2/Set $15.74
PN 16-020 -- SUBARU, Manifold-to-Y Pipe, L4, 2.2L ('95-'99), 2/Set $25.19
PN 45-600 - V-Band Clamp Gasket 6.00" Dim: 6.03 ID x 6.74 OD x .060 Thick 2/Set $27.29