Home > Turbo Gaskets >

PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
 
"TE-45" (TE-63E) Turbo-to-Downpipe
MSRP $26.76


Availability:: Usually Ships in 24 Hours
Product Code: 18-015

Description Additional Informaion Installation Tips
 
Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe
4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3"
1(ea)

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Turbo Gaskets
Turbo Gaskets > Turbo Down Pipe


PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set $29.39
PN 2092 - Chevrolet L6 194 Cubic Inch Engine (1929 - 1933), 3 Piece Set $65.61
PN 8007 - 3" Pipe Flange, 2 Slotted Bolt Holes, 4" to 4-3/8" Bolt Hole Spacing, 1(ea) $12.59
PN 6027 - MOPAR Small Block V8- Pre Magnum, 318, 340,360, 1-1/4" x 1-3/4" End Ports,2/Set $51.23
PN 8003 - 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set $22.04
PN 3013 - Ford, 460ci Fuel Injected, ('88-'89) & ('93-'98), Manifold, 2/Set $49.34
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set $17.84
PN 3069 - FORD V8, 5.0L Coyote Engine (2011+),1-13/16" Round Port, Header Applications Only, 2/Set $49.02
PN 8084 - UNIVERSAL REMFLEX® 2-15/16" 3 Bolt Flange Gasket 2-15/16" Port with 3(ea) 11/32" Bolt Holes on a 3-7/32" Bolt Spacing 2 Each $24.66