Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 8085 - UNIVERSAL REMFLEX® 1-1/4" 2 Bolt Flange Gasket 1-1/4" Port with 2(ea) 5/16" Bolt Holes on a 2-1/4" Bolt Spacing 2 Each $17.84
PN 2054 - Chevrolet GM, L4, 2.5L/153 OHV L4, Intake and Exhaust Gasket, (Includes Heat Riser Gasket), 2 Piece Set $51.12
PN 8031 - 2-5/8" Pipe, 3 Bolt Holes, 4-1/2" Bolt Hole Spacing, 2/Set $25.61
PN 8021 - 1-1/2" Pipe, 2 Slotted Bolt Holes, 2-9/16" to 2-15/16" Bolt Hole Spacing, 2/Set $16.79
PN 6007 - Mopar, V10, 8.0L/488ci ('94-'03) Truck Engine, 2/Set $59.10
PN 2087 - GM V8 Small Block Header or Manifold Gasket PORT SIZE: 1.43" WIDE X 1.43" TALL 2/Set $43.46
PN 7007 - Toyota V6 -OHV 3.4L "5VZFE" ('95-'04), 1-25/32" Dia. Round Port, Header & Manifold Applictions, 2/Set $39.89
PN 8034 - GM Ecotec Down Pipe/Header Connector Flange, Fits: 2.0L Supercharged (LSJ), 2.2L (L61), & 2.4L (LE5). 2-5/8" Diameter Pipe, (3)bolt holes w/ 4-3/8" Bolt Spacing, 1(ea) $20.99
PN 3040 - Ford L4, L-Head, 200/3.3L, Model "A" & "B" ('28-'34), 2/Set $40.52