Home > Turbo Gaskets >

PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea)
 
"TE-45" (TE-63E) Turbo-to-Downpipe
MSRP $26.76


Availability:: Usually Ships in 24 Hours
Product Code: 18-015

Description Additional Informaion Installation Tips
 
Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe
4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3"
1(ea)

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Turbo Gaskets
Turbo Gaskets > Turbo Down Pipe


PN 18-006 - TURBO - Garrett, Greddy T4 - Turbo Inlet / Up-Pipe 4 Bolt Gasket, 3" x 2" Square (Open Plenum), 4 Elongated Bolt Holes with Bolt Spacing: (A) 3-1/4" x (B) 2-3/4", 1(ea) $18.89
PN 18-021--Turbo - Basic T-6 Inlet Gasket, Divided Plenum with two 1.875"w x 2.315"h Ports, 4 Bolt Holes with Bolt Spacing: (A) 2.75" x (B) 4.375", 1(ea) $25.19
PN 18-009 -- Turbo - "Precision Turbo" 63 MM Outlet Gasket, 4 Bolt Holes with 2-9/16" Diameter Outlet Hole, 1(ea) $26.76
PN 2054 - Chevrolet GM, L4, 2.5L/153 OHV L4, Intake and Exhaust Gasket, (Includes Heat Riser Gasket), 2 Piece Set $51.12
PN 45-400 - V-Band Clamp Gasket 4.00" Dim: 4.03 ID x 4.74 OD x .060 Thick 2/Set $17.84
PN 13-004 - BUICK, V6, OHV 3.2L ('78), 3.7L ('64-'67), Jeep ('66-'71), 3.8L ('75-'78), 1-1/16"w x 1-11/16"h Square Port, Manifold or Headers, 2/Set $41.25
PN 18-001 - TURBO - GARRET " GT25, GT28", GREDDY "18G" Turbo Outlet/Down Pipe Gasket, 1ea $27.29
PN 13-015 - BUICK, V6 - 3.8L Turbo-to-Down Pipe Gasket, (Open Plenum), 1(ea) $27.29
PN 18-004 - TURBO - (O2) Oxygen Housing, 3" Diameter, 4-Bolt Flange Gasket with 3-3/16" Bolt Spacing, 1(ea) $17.84