Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 3074 - Ford - V8, Windsor Small Block J302 Head 1-15/32 Wide X 1-15/32 Tall Port, W/ 2-7/16" Diagonal Bolt Spacing 2/SET $43.46
PN 8031 - 2-5/8" Pipe, 3 Bolt Holes, 4-1/2" Bolt Hole Spacing, 2/Set $25.61
PN 8022 - 2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $16.79
PN 8064 - 3-7/8" Hole Size, 4-Bolt Connector Gasket, (Lemon Header Pattern), 3-7/16" Bolt Hole Spacing, 2/Set $26.76
PN 8084 - UNIVERSAL REMFLEX® 2-15/16" 3 Bolt Flange Gasket 2-15/16" Port with 3(ea) 11/32" Bolt Holes on a 3-7/32" Bolt Spacing 2 Each $24.66
PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set $29.39
PN 3065 - Ford - V8, Cleveland Hi-Port, Adaptor Flange, 2"w x 2-1/4"h Egg-Shaped Port, 8/Set $52.49
PN 8086 - 2 Bolt Flange Gasket, Fits: Hooker® Cast Iron 2 Bolt "LS" Flange 2/Set $22.04
PN 4007 - DIESEL REMFLEX® HD CATERPILLAR ENGINE Exhaust Manifold Gasket Set Port Size 2" Wide X 2-1/2" Tall (2) 25/64 Bolt Holes @ 3-1/2" Spacing Fits: #3408 ENGINE 8 Piece Set $98.69