Home > Collector / Flange Gaskets > 3 Bolt >

PN 8015 - 2-1/4" Collector, 3 Bolt Holes, 3-7/16" Bolt Hole Spacing, 2/Set
PN 8015 - 2-1/4" Collector, 3 Bolt Holes, 3-7/16" Bolt Hole Spacing, 2/Set
 
MSRP $20.25


Availability:: Usually Ships in 24 Hours
Product Code: 8015

Description Additional Informaion Installation Tips
 
2-1/4" Collector
3 Bolt Holes with 3-7/16" Bolt Hole Spacing
2/Set


Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Collector / Flange Gaskets > 3 Bolt


PN 8065 - 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $29.39
PN 6032 - MOPAR, V8 - Hemi 426 Performance Factory Head "D6" ('73-'74), 2-1/32"w x 2-1/16"h Square Port, Header Applications, 2/Set $54.59
PN 8034 - GM Ecotec Down Pipe/Header Connector Flange, Fits: 2.0L Supercharged (LSJ), 2.2L (L61), & 2.4L (LE5). 2-5/8" Diameter Pipe, (3)bolt holes w/ 4-3/8" Bolt Spacing, 1(ea) $20.99
PN 15-014 - NISSAN - L6, 280Z 2.8L - L28E, L28ET ('79-'83), Datsun 810 2.4L-2.8L - L24E, LD28 ('80-'84) 1/EACH $25.19
PN 2052 - Chevrolet, Y-Pipe-to-Rear-Pipe Connector, Dual Port, 1(ea) $33.90
PN 8066 - Oval 2-Bolt Connector Gasket, 1-3/16”w x1-1/2”h Oval Port and 2-1/16" Bolt Spacing, 2/Set $24.66
PN 6028 - MOPAR, V8, Magnum, 318 ('92-'02), 360 ('93 & Newer), For Use With Weld Bead Headers, 2/Set $51.23
PN 2009 - Chevrolet, 262/4.3L ('85-'03) Including Vortec, 2/Set $37.05
PN 7014 - Toyota - L4 - Diesel, 3B Engine, Manifold Applications Only, 1(ea) $50.39