Home > Collector / Flange Gaskets > 4 Bolt >

PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set
PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set
 
4-into-One 8-Bolt Connector Gasket
(1/4") Bolt Holes
MSRP $29.39


Availability:: Usually Ships in 24 Hours
Product Code: 8069

Description Additional Informaion Installation Tips
 
4-INTO-ONE, 8 Bolt Connector Gasket
(4) 1-5/8" Diameter Tubes (2" Center-to-Center Measurement)
8 (1/4") Bolt Holes with 1-5/8" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15-20 Ft Lbs.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Collector / Flange Gaskets > 4 Bolt
Collector / Flange Gaskets > Square Gaskets


PN 8082 - UNIV - 2-3/4" 2-Bolt Collector Flange Gasket; (2) each 1/2" Bolt Holes with 4-1/2" Bolt Spacing, 2/Set $22.35
PN 8064 - 3-7/8" Hole Size, 4-Bolt Connector Gasket, (Lemon Header Pattern), 3-7/16" Bolt Hole Spacing, 2/Set $26.76
PN 3046 - Ford - 289-351 Windsor Specialty Products & Design "SPD" Adaptor Plate Gasket, 2/Set $51.02
PN 8007 - 3" Pipe Flange, 2 Slotted Bolt Holes, 4" to 4-3/8" Bolt Hole Spacing, 1(ea) $12.59
PN 6012 - Mopar 4.0L/241ci ('54-'56) OHV Hemi 2/set $53.85
PN 3064 - Ford - V8, "A.C.T.", Small Block Windsor, 1-5/16"w x 1-11/16"h Square Port, Headers, 2/Set $41.78
PN 3015 - Ford, FE Engines, 332 ('58-'59), 352 Car ('58-'65) 352 Jeep ('59), 390 ('61-'65) (Except T-Bird '61-64) / 427 Mid-Riser ('66-'67), 428 ('66-'70), 1-3/8"w x 1-7/8"h Square Port, Manifold or Headers, 2/Set $58.26