Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 3089 - FORD / MAZDA V6, 4.0L Ford- (Aerostar/Ranger) '90-'96, (Explorer) '91-'96 Mazda- (B4000) '94-'96, (Navaho) '91-'94 Port Size- 1-13/16" Wide x 1 1/2" Tall 2/Set $40.52
PN 2007 - Chevrolet, Small Block, 262 - 400, Large D-Port, "Brodix Track 1", LT-1 Corvette, 2/Set $41.78
PN 3018 - Ford, 460ci ('88-'98), Fuel Injected, Header Applications,2/Set $47.97
PN 3088 - Ford - V8 6.2L F150 Raptor ('10-'14), F250/F350/F450 SUPERDUTY ('11+), 1-11/16" Tall x 1-13/16" Tall Square Port, 2/Set $52.49
PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set $29.39
PN 3096 - FORD Small Block V8 REMFLEX® AFR® Gasket # 6916 3" Bolt Spacing Port Dim: 1.44 Wide x 1.52 Tall 2/Set $45.14
PN 3002 - Ford, L4 - 2.3L/140ci Including Turbo ('74-'93), Headers Only, 1(ea) $34.64
PN 3035 - Ford, 289, 302, 351 Windsor, Fits Cylinder Heads with 3" Bolt Spacing on each port - "Dart, Canfield, ProTop Cylinder Heads" , Header Applications, 2/Set $47.55
PN 8015 - 2-1/4" Collector, 3 Bolt Holes, 3-7/16" Bolt Hole Spacing, 2/Set $20.25