Turbo Gaskets

Home > Turbo Gaskets >

PN 18-013 - Turbo - T-3 Internal Wastegate Eliminator Flange, Turbo-to-Downpipe, 2-1/4" Round Port - Irregular Shape, 4 Bolt Holes with Spacing: (A) 3-1/2" x (B) 3-1/2" x (C) 3-13/16" x (D) 3-5/8", 1(ea)

T-3 Internal Wastegate Eliminator Flange

MSRP $26.76

Availability:: Usually Ships in 24 Hours
Product Code: 18-013

Description

Additional Informaion

Installation Tips

T-3 Internal Wastegate Eliminator Flange

2-1/4" Round Port

Turbo-to-Downpipe

Irregular Shape

4 Bolt Holes with Spacing: (A) 3-1/2" x (B) 3-1/2" x (C) 3-13/16" x (D) 3-5/8"

1(ea)

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.

Suggested Torque

Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Turbo Gaskets
Turbo Gaskets > Turbo Wastegate
Turbo Gaskets > Turbo Down Pipe
Turbo Gaskets > Turbo T-3

	PN 45-550 - V-Band Clamp Gasket 5.50" Dim: 5.53 ID x 6.24 OD x .060 Thick 2/Set $27.29
	PN 18-002 - TURBO - A 'PEXI' RX6A GASKET KIT: Contains: PN 18-002(a) Exhaust Inlet (1 ea): PN 18-002(b) Exhaust Outlet (1 ea): PN 18-002(c) HKS Wastegate (1 ea), 3 Piece Kit $45.14
	PN 45-400 - V-Band Clamp Gasket 4.00" Dim: 4.03 ID x 4.74 OD x .060 Thick 2/Set $17.84
	PN 45-300 - V-Band Clamp Gasket 3.00" Dim: 3.03 ID x 3.74 OD x .060 Thick 2/Set $16.16
	PN 22-001- Marine Exhaust Gasket - 3" ID x 5" OD With (4) Bolt Holes on a 4-1/8" Bolt Circle, 2/Set $32.54
	PN 53-001 - Honda - L4 SOHC, 1.5L "EW1, EW2" ('84-'86), "EW3" (1985), "EW4" (1986), "D15A1, A2, A3" (1987), 2/Set $36.74
	PN 18-015 - Turbo -"TE-45" (TE-63E) Turbo-to-Downpipe, 4-Bolt Holes with Spacing Across Cut-Out: (A) 3-1/4" x (B) 3", 1(ea) $26.76
	PN 45-600 - V-Band Clamp Gasket 6.00" Dim: 6.03 ID x 6.74 OD x .060 Thick 2/Set $27.29