Home > Collector / Flange Gaskets > 2 Bolt >

PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set
 
(15/32") Bolt Holes
MSRP $17.84


Availability:: Usually Ships in 24 Hours
Product Code: 8068

Description Additional Informaion Installation Tips
 
1-5/8" Pipe
2-Bolt Connector Gasket
2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing
2/Set

Bolt Hole Spacing is measured from the center of one bolt hole to the center of the other bolt hole.
Suggested Torque
  • Suggested Torque: 15 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Companion to 3021 - Ford 292 V8 Tuesday, June 23, 2015
Reviewer: David from Hansville, WA  
This gasket fits the Ford 292 crossover pipe. These pipes are notoriously hard to seal because they are like a header pipe bolted to 2 cast iron manifolds. The pipe and manifolds are always cooling and heating differently so they fight and wear any seal. This gasket fits well and seems to be sealing well.
I will come back after 5000+ miles and add a second review...

Was this review helpful to you?


Browse for more products in the same category as this item:

Collector / Flange Gaskets > 2 Bolt


PN 2064 - GM V8 "Husler" Header SBC "360" Sprint Car, Stahl 7-Bolt Pattern, 6/Set $50.70
PN 2066 - GM - V8, LS7 Corvette ('06-'13) / LS9 Corvette ('09-'13) / L98, D Port 2"w x 1-3/4"h, Header Applications, 2/Set $41.78
PN 6010 - Mopar Hemi 426 ('64-'71), 528 ('00-Newer) Header Applications, 2/set $54.59
PN 8026 - 2-1/2" Pipe, 2 Bolt Holes, 3-1/2" Spacing, 2/Set $20.99
PN 4007 - DIESEL REMFLEX® HD CATERPILLAR ENGINE Exhaust Manifold Gasket Set Port Size 2" Wide X 2-1/2" Tall (2) 25/64 Bolt Holes @ 3-1/2" Spacing Fits: #3408 ENGINE 8 Piece Set $98.69
PN 3052 - Ford - V8, Windsor Small Block Single Port Gasket, 1-3/8 X 1-5/8 W/ 2" Bolt Spacing, 8/Set $49.34
PN 8033 - 3-HOLE HEADER DOWN PIPE, with (3) 1-7/16" Holes,and 3 Bolt Holes, 2/Set $26.76
PN 8034 - GM Ecotec Down Pipe/Header Connector Flange, Fits: 2.0L Supercharged (LSJ), 2.2L (L61), & 2.4L (LE5). 2-5/8" Diameter Pipe, (3)bolt holes w/ 4-3/8" Bolt Spacing, 1(ea) $20.99
PN 8086 - 2 Bolt Flange Gasket, Fits: Hooker® Cast Iron 2 Bolt "LS" Flange 2/Set $22.04