Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. Saturday, January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 2054 - Chevrolet GM, L4, 2.5L/153 OHV L4, Intake and Exhaust Gasket, (Includes Heat Riser Gasket), 2 Piece Set $51.12
PN 6026 - MOPAR V8-Magnum 360/5.9L "SpinTech" Header Adaptor Plate Gasket, 2/Set $55.64
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set $17.84
PN 3006 - Ford, V8 - 351 ('70-'74) Cleveland, 2bbl Carb. (Except Boss, High Output & Cobra Jet), Manifold or Headers, 2/Set $47.97
PN 3035 - Ford, 289, 302, 351 Windsor, Fits Cylinder Heads with 3" Bolt Spacing on each port - "Dart, Canfield, ProTop Cylinder Heads" , Header Applications, 2/Set $47.55
PN 7004 - Toyota V6 - OHV 3.0L "3VZE" ('88-'95), 1-9/32" x 1-27/32" Oval Port, Header & Manifold Applications, 2/Set $44.09
PN 8035 - "Air Power Systems" Down-Pipe-Back, 2-Bolt Connector Flange Gasket, 3-1/2" Pipe, with 4-3/16" Bolt Hole Spacing, 2/Set $26.76
PN 8044 - 2-5/32" Pipe, 2 (13/32") Bolt Holes, 3-3/4" Bolt Spacing, 2/Set $20.99
PN 3089 - FORD / MAZDA V6, 4.0L Ford- (Aerostar/Ranger) '90-'96, (Explorer) '91-'96 Mazda- (B4000) '94-'96, (Navaho) '91-'94 Port Size- 1-13/16" Wide x 1 1/2" Tall 2/Set $40.52