Home > Manifold / Header Gaskets > Nissan > Inline 6 >

PN 15-013 - NISSAN - L6, 2.4L/2393cc - 240Z "L24" ('70-'73), 2.6L/2565cc - 260Z "L26" ('74-'75), 1(ea)
PN 15-013 - NISSAN - L6, 2.4L/2393cc - 240Z "L24" ('70-'73), 2.6L/2565cc - 260Z "L26" ('74-'75), 1(ea)
 
Alternative Views:
240Z "L24" ('70-'73),  260Z "L26" ('74-'75)
MSRP $59.84


Availability:: Usually Ships in 24 Hours
Product Code: 15-013

Description Installation Tips
 
NISSAN
REMFLEX®

L6

2.4L/2393cc - 240Z "L24" ('70-'73)

2.6L/2565cc - 260Z "L26) ('74-'75)

1(ea)
Suggested Torque
  • Torque: 20 Ft Lbs

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Manifold / Header Gaskets > Nissan > Inline 6


PN 53-001 - Honda - L4 SOHC, 1.5L "EW1, EW2" ('84-'86), "EW3" (1985), "EW4" (1986), "D15A1, A2, A3" (1987), 2/Set $36.74
PN 13-001 - BUICK, V8, 400, 430 ('67-'69), 455 ('70-'76) OHV, 2/Set $50.39
PN 6003 - Mopar 318/5.2L, 360/5.9L ('68-'92),(Pre-Magnum), Header Applications, 2/set $52.49
PN 18-004 - TURBO - (O2) Oxygen Housing, 3" Diameter, 4-Bolt Flange Gasket with 3-3/16" Bolt Spacing, 1(ea) $17.84
PN 18-011 -- Turbo -MR2 Turbo-to-Exhaust Manifold Gasket, Single Port 70MM x 53MM (Divider Removed), Fits: Toyota Turbo PN 17201-74070, 1(ea) $23.09
PN 18-023 - Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.830"w x 2.350"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea) $20.46
PN 45-275 - V-Band Clamp Gasket 2.75" Dim: 2.78 ID x 3.49 OD x .060 Thick 2/Set $15.74
PN 18-030 - Cummins Turbo to Manifold Gasket, DIVIDED PLENUM , 1 Piece $31.49
PN 26-001 - 1.2L/1198cc (Austin '54-'57)(Metro. '54-'55), 1.5L/1489cc (Austin '54-'61)(Metro. '56-'62)(MG '54-'79)(Morris '54-'61), 1.6L/1588 & 1622cc (Austin '61-'66)(MG '59-'68)(Morris '61-'71), 1.8L/1798cc (Austin '72-'77)(MG '61-'80), 1(ea) $59.10