Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 8022 - 2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $16.79
PN 3002 - Ford, L4 - 2.3L/140ci Including Turbo ('74-'93), Headers Only, 1(ea) $34.64
PN 1003 - AMC (Jeep), 304 ('70-'79), 360 ('70-'93), 390 ('70), 401('71-'76) "Weld Bead" Header, 2/Set $50.70
PN 3079 - Ford - V8, Small Block Windsor Fits "Large Port" Dart® Cylinder Heads and others 2" Bolt Spacing Port Size- 1-11/32 Wide x 1-9/16" Tall 2/Set $43.46
PN 3012 - Ford, V8 - 351M (Modified) /400 ('75-'82), Manifold or Headers, 2/Set $51.02
PN 8084 - UNIVERSAL REMFLEX® 2-15/16" 3 Bolt Flange Gasket 2-15/16" Port with 3(ea) 11/32" Bolt Holes on a 3-7/32" Bolt Spacing 2 Each $24.66
PN 3080 - FORD L6 Remflex® 4.9L 300 Cubic Inch Intake and Exhaust Manifold Gasket Fits: Bronco ('87-'92), Econoline Series & F Series-150,250,350 ('87-'96) (Includes #3005B Riser Gasket) 2 Piece Set $59.10
PN 3052 - Ford - V8, Windsor Small Block Single Port Gasket, 1-3/8 X 1-5/8 W/ 2" Bolt Spacing, 8/Set $49.34
PN 22-005 - Marine Pleasure Craft (PCM) 4" Exhaust Manifold Riser Elbow Gasket, Rectangular Shape with 4 (13/32") Bolt Holes 1(ea) $27.29