1.30"w x 1.80"h Oval Port

2bbl carb Cleveland

351 ('70-'74)

Except Boss, H.O. ,C.J.

For Weld Bead Header Applications

2/Set

See PN 3006 for Manifold and/or Header Applications

Use with raised weld bead headers - additional sealing material is provided around the weld bead to provide a better seal.

1.)  DO NOT BEND!  Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
            If you bend them, they will break!

2.)  Do not over tighten.  When properly installed the flange should be tightened evenly - See the suggested torque range.

3.)  Longer bolts aren't necessary.  Though Remflex are thicker than other gaskets, standard length bolts will work fine.

4.)  Do not use sealers.  Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.

Questions?  1-866-641-SEAL (7325) [email protected]