Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 2008 - Chevrolet, 5.3L - 6.2L LS1, LS2, LS3, LS6, L99 Car (including Corvette), 4.8L - 6.0L (GM Truck Vortec), 6.0L/6.2L LS1 HUMMER 2/Set $41.78
PN 2006 - Chevrolet Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Head Port Match, for Manifold or Header Applications, 2/Set $41.78
PN 8069 - 4-into-ONE, 8 Bolt Connector Gasket, (4) 1-5/8" Diameter Tubes, 2/Set $29.39
PN 2004 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Round Port, for Header Applications, 2/Set $41.78
PN 2016 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Square Port, Header Applications 2/Set $41.78
PN 3071 - Ford, V8 - 429 BOSS (All Years), 2"w x 2-1/16"h Rectangular Port, Header Applications, 2/Set $52.49
PN 2003 - Chevrolet, Big Block, 396/6.5L, 402/6.6L, 427/7.0L, 454/7.4L, Match to Stock Port, Manifold or Header Applications, 2/Set $50.70
PN 8074 - UNIVERSAL REMFLEX® 2 Bolt Flange Gasket 1-3/4" Pipe Size 2-9/16" Center to Center Bolt Spacing 2/Set $17.84
PN 8043 - 2-9/16" Pipe Flange, Irregular Shape, 3 (13/32") Bolt Holes, Bolt Spacing: (A): 4-7/16" x (B): 4-7/8" x (C): 4-7/8", 2/Set $29.39