V8 - Gurney-Weslake Heads

Small Block Header Gaskets

1-3/4" Port

2 Bolt Holes with 2-9/16" Bolt Center-to-Bolt Center Spacing

8 Individual Pieces Per Set

SUGGESTED TORQUE 16 TO 20 FT LBS

1.)  DO NOT BEND!  Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
            If you bend them, they will break!

2.)  Do not over tighten.  When properly installed the flange should be tightened evenly - See the suggested torque range.

3.)  Longer bolts aren't necessary.  Though Remflex are thicker than other gaskets, standard length bolts will work fine.

4.)  Do not use sealers.  Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.

Questions?  1-866-641-SEAL (7325) [email protected]