Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 8007 - 3" Pipe Flange, 2 Slotted Bolt Holes, 4" to 4-3/8" Bolt Hole Spacing, 1(ea) $12.59
PN 2085 - GM V8 Small Block Fits: Tall Raised Port Aftermarket Heads, 1-5/16" Wide x 1-7/8" Tall "Raised" 3/16" above bolt line, 2/Set $49.34
PN 2065 - GM Performance Circle Track Motors: #CT355 (603) / #CT400 (604), Fits: Schoenfeld Headers, Fast Burn Heads Raised D Port, & Others, 2/Set $41.78
PN 8022 - 2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $16.79
PN 3005 - Ford, L6 - 300 ('65-'86), Combination Intake/Exhaust, 1-9/16"w x 1-25/32"h Oval Intake Ports (x) 1-11/32"w x 1-3/4"h Square Exhaust Ports, Includes Riser Gasket, Manifold or Headers, 2 Piece Set $60.15
PN 2010 - Chevrolet, 262/4.3L ('85-'95), 2/Set $37.05
PN 3018 - Ford, 460ci ('88-'98), Fuel Injected, Header Applications,2/Set $47.97
PN 1004 - AMC V8 REMFLEX® Header Gasket / Non Dog Leg 290 ('66-'69), 343 ('67-'69), 390 ('68-'69) 2/Set $50.70
PN 6032 - MOPAR, V8 - Hemi 426 Performance Factory Head "D6" ('73-'74), 2-1/32"w x 2-1/16"h Square Port, Header Applications, 2/Set $54.59