Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:


Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN
7010 for Manifold Applications)


Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 8034 - GM Ecotec Down Pipe/Header Connector Flange, Fits: 2.0L Supercharged (LSJ), 2.2L (L61), & 2.4L (LE5). 2-5/8" Diameter Pipe, (3)bolt holes w/ 4-3/8" Bolt Spacing, 1(ea) $20.99
PN 6006 - Universal/Mopar 2-1/4" Pipe 2/set $20.78
PN 6017 - Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea) $59.10
PN 7014 - Toyota - L4 - Diesel, 3B Engine, Manifold Applications Only, 1(ea) $50.39
PN 6022 - Mopar,V8 Hemi 5.7L ('09 & Up), 6.1L ('05-'10), ​6.2L Hellcat ('15-'26), 6.4L ('12-'24), TTI Headers,2/Set $52.49
PN 1004 - AMC V8 REMFLEX® Header Gasket / Non Dog Leg 290 ('66-'69), 343 ('67-'69), 390 ('68-'69) 2/Set $50.70
PN 3074 - Ford - V8, Windsor Small Block J302 Head 1-15/32 Wide X 1-15/32 Tall Port, W/ 2-7/16" Diagonal Bolt Spacing 2/SET $43.46
PN 8050 - Fujitsubo 3-Bolt Import Header Flange Gasket, Dual 4-Into-2 / 2-Into-1, 1-7/8" Ports, 2/Set $26.76
PN 2085 - GM V8 Small Block Fits: Tall Raised Port Aftermarket Heads, 1-5/16" Wide x 1-7/8" Tall "Raised" 3/16" above bolt line, 2/Set $49.34