Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 2032 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Oval Port, Header Applications, 2/Set $41.78
PN 8087 - UNIV - 3-Bolt , 2-3/4" Port, Flange Gasket with 3 Bolt Holes, on a 3-1/8" Bolt Spacing, 2/Set $22.04
PN 2017 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Oval Port, Header Applications, 2/Set $41.78
PN 3039 - Ford V8, 289 - 351 Windsor, Fits cylinder heads with 3" Bolt Hole Spacing on each Port - Husler Headers, AFR, Dart Heads and others, 2/Set $40.52
PN 2004 - Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Round Port, for Header Applications, 2/Set $41.78
PN 8074 - UNIVERSAL REMFLEX® 2 Bolt Flange Gasket 1-3/4" Pipe Size 2-9/16" Center to Center Bolt Spacing 2/Set $17.84
PN 6014 - Mopar 8.0L ('96-'07) Viper 2/set $59.10
PN 2076 - Chevrolet, Small Block, OVAL PORT HEADER GASKET DIM: 1-27/32" WIDE X 1-19/32" TALL FITS: CFE SBX 4.5" BORE CENTERS 3.020" DIAGONAL BOLT SPACING INDIVIDUAL PORT 8 Piece Set $50.70
PN 3008 - Ford, FE Engines, 332 - 428 ('58 - '76 ), 390 incl T-Bird ('61-64), 410 Mercury / 428 ('66-'70) and 428 Cobra Jet ('66-'67 only), 1-9/16"w x 2-5/16"h Square Port, 8-Bolt Pattern for Manifold Applications, 2/Set $58.26