Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 2006 - Chevrolet Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Head Port Match, for Manifold or Header Applications, 2/Set $41.78
PN 2091 - GMC V6 305 CUBIC INCH ENGINE 1960-1969 1-9/16" x 1-7/16" Square Port w/ 3-3/16" Bolt Hole Spacing 6 Piece Set $38.10
PN 8038 - 3" Pipe, 2 (9/16") Bolt Holes with 5-1/4" Bolt Spacing, 2/Set $25.61
PN 8068 - 1-5/8" Pipe, 2-Bolt Connector Gasket, 2 (15/32") Bolt Holes with 2-15/16" Bolt Spacing, 2/Set $17.84
PN 2008 - Chevrolet, 5.3L - 6.2L LS1, LS2, LS3, LS6, L99 Car (including Corvette), 4.8L - 6.0L (GM Truck Vortec), 6.0L/6.2L LS1 HUMMER 2/Set $41.78
PN 2086 - GM V8 Small Block Fits: AFR SBC HEADS AFR GASKET #6905 PORT SIZE: 1.60" WIDE X 1.50" TALL 2/Set $51.02
PN 2087 - GM V8 Small Block Header or Manifold Gasket PORT SIZE: 1.43" WIDE X 1.43" TALL 2/Set $43.46
PN 3086 - FORD V8 REMFLEX® FE Header Gasket Fits: Hooker Header Part # 6903-HKR Weld Bead Headers Port Size: 1-1/4" Wide x 1-3/4" Tall 2/Set $59.10
PN 6044 - V8 - CHRYSLER/DESOTO, Heat Riser Delete (Modified Manifolds and Headers) Year 1956, 2/Set $54.59