Home > Manifold / Header Gaskets > Toyota > Inline 4 >

PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
PN 7002 - Toyota 2.4L, "22R", "22RE", "22REC" ('85-'95), "EGR" and "AIR TUBE" Gasket Assortment Included , Header Applications, 8 Piece Set,
 
Alternative Views:
Engine Code: ""22R", "22RE", "22REC"
MSRP $48.29


Availability:: Usually Ships in 24 Hours
Product Code: 7002

Description Installation Tips
 
TOYOTA
L4
REMFLEX®
For Header Applications
2.4L,"22R, 22RE, 22REC" ('85-'95)
1-11/32" x 1-25/32" Egg Shaped Port
8 Piece Set

(Includes PN 7018 for EGR and AIR TUBE Gasket Assortment)

(See PN 7010 for Manifold Applications)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Do it right the first time. January 9, 2010
Reviewer: Remington Scott from Fort Huachuca, AZ United States  
Received it in 3 days, packaged to prevent bending and damage. I installed a header with the gaskets that where included (manila folder). Even with maximum torque leak still existed. I removed the EGR tube and noticed that the flange was warped, so i decided to use some hi-temp sealant to fill the gaps. It worked for a little while and still could hear/feel the air escaping. My attempt to seal it with garbage gaskets and hi-temp sealant wasnt cutting it. So I ventured through the WWW. and ran across REMflex. after reading and doing my own research on the product i decided to purchase and try it out. I received it, installed it no leaks, no flapping sound im happy.

With just two dallors more you can get an superb gasket that requires only minimum torque with a maximum seal.
All in all great product, would purchase more and highly recommend




Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Toyota > Inline 4


PN 18-002 - TURBO - A 'PEXI' RX6A GASKET KIT: Contains: PN 18-002(a) Exhaust Inlet (1 ea): PN 18-002(b) Exhaust Outlet (1 ea): PN 18-002(c) HKS Wastegate (1 ea), 3 Piece Kit $45.14
PN 8022 - 2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $16.79
PN 7013 - Toyota, V6, 3.4L "5VZFE" ('95-'04) TRD Header Gasket Set, Part A: 7 Pieces, Part B: 3 Pieces, 10 Pieces Total $48.29
PN 6010 - Mopar Hemi 426 ('64-'71), 528 ('00-Newer) Header Applications, 2/set $54.59
PN 2048 - Chevrolet, 5.3L - 6.2L LS1, LS2, LS3, LS6, L99 Car (including Corvette), 4.8L - 6.0L (GM Truck Vortec), 6.0L/6.2L LS1 HUMMER, 1-1/2" Dia. Port, "Weld Bead" Type Header Applications, 2/Set $41.78
PN 2066 - GM - V8, LS7 Corvette ('06-'13) / LS9 Corvette ('09-'13) / L98, D Port 2"w x 1-3/4"h, Header Applications, 2/Set $41.78
PN 6040 - MOPAR 426 Hemi "High Port" Gasket Fits: STAGE V® (Five) Engineering Heads 16 Bolt Holes & Rectangular Ports Port Size 1.570" Tall x 2.060" Wide 2/Set $59.10
PN 2045 - Chevrolet, Y-Pipe-to-Rear-Pipe Connector, GM 5.7L - 7.4L Truck ('96-'00), 1(ea) $33.90
PN 3064 - Ford - V8, "A.C.T.", Small Block Windsor, 1-5/16"w x 1-11/16"h Square Port, Headers, 2/Set $41.78