GM

V8 / LS Engine

REMFLEX®

1-7/8" Dia. Round Port

Compare to Fel-Pro MS92467

Fits the following applications:

Calloway, Vin Code "G", LS1, (1999)

GM Car:

325/ 5.3L - LS1 Vortec ('05-'08)

346/ 5.7L - LS1 ('97-'08) GTO (2004), Camaro & Firebird ('01-'02)

346/ 5.7L - LS6 ('01-'05) Vin Code "S"

364/ 6.0L - LS2 ('05-'07) Vortec
/6.2L (2008 & Up)

GM Truck:

293/ 4.8L Vortec ('99-'08)

325/ 5.3L Vortec ('99-'08)

364/ 6.0L Vortec ('99-'08)

HUMMER:
6.0L - LS1 ('02-'07)
6.2L - LS1 ('02-'09)

Isuzu Truck 5.3L ('03-'07)

For Manifold and Header Applications

Corvette Header Applications:
5.7L (1997 - 2000 Header & Manifold / Headers Only 2001-2004)
6.0L (2005 - 2007)
6.2L (2008) (2009 & Up -Including Vin Code W)

2/Set

(See RF2048 for Weld Bead Header Applications)

(See RF2049 for additional Header Applications)

INSTALLATION TIPS:  We want you to get the most from your new Remflex exhaust gaskets.  To assure your complete satisfaction, please follow these basic installation guidelines:

1.)  DO NOT BEND!  Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
            If you bend them, they will break!

2.)  Do not over tighten.  When properly installed the flange should be tightened evenly - See the suggested torque range.

3.)  Longer bolts aren't necessary.  Though Remflex are thicker than other gaskets, standard length bolts will work fine.

4.)  Do not use sealers.  Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.



Questions?  1-866-641-SEAL (7325) info@remflex.com