1-1/2" Port Size for "Weld Bead" Type Header Applications

For use with "Raised" Weld Bead Headers - Additional sealing material is provided around the weld bead to provide a better seal.

Compare to Fel-Pro MS92467

Fits the following applications:

Calloway, Vin Code "G", LS1, (1999)

GM Car:

325/ 5.3L - LS1 Vortec ('05-'08)

346/ 5.7L - LS1 ('97-'04) GTO (2004), Camaro & Firebird ('01-'02)

346/ 5.7L - LS6 ('01-'05) Vin Code "S"

364/ 6.0L - LS2 ('05-'07) Vortec

GM Truck:

293/ 4.8L Vortec ('99-'08)

325/ 5.3L Vortec ('99-'08)

364/ 6.0L Vortec ('99-'08)
/ 6.2L (2008 & Up)

HUMMER:

6.0L - LS1 ('02-'07)
6.2L - LS1 ('02-'09)

Isuzu Truck 5.3L ('03-'07)

Corvette Header Applications:

5.7L (1997 - 2004)
6.0L (2005 - 2007)

6.2L (2008) (2009 & Up -Including Vin Code W)

2/Set

(See RF2008 and RF2049 for additional Header Applications)

INSTALLATION TIPS:  We want you to get the most from your new Remflex exhaust gaskets.  To assure your complete satisfaction, please follow these basic installation guidelines:

1.)  DO NOT BEND!  Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
            If you bend them, they will break!

2.)  Do not over tighten.  When properly installed the flange should be tightened evenly - See the suggested torque range.

3.)  Longer bolts aren't necessary.  Though Remflex are thicker than other gaskets, standard length bolts will work fine.

4.)  Do not use sealers.  Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.



Questions?  1-866-641-SEAL (7325) info@remflex.com