Remflex Exhaust Header / Manifold Gaskets
Help / FAQ
PN 18-017 -- Turbo, Volvo/Garrett T-3 Turbo-to-Manifold 4-Bolt Adaptor Plate Gasket to fit Stock Toyota Manifold, 1(ea)
Usually Ships in 24 Hours
Turbo - Volvo/Garrett T3
Turbo- to-Manifold 4-Bolt Adaptor Plate Gasket
To Fit Stock Toyota Manifold
2-5/8" Round Port
2-5/8" Round Port
INSTALLATION TIPS: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
Questions? 1-866-641-SEAL (7325) firstname.lastname@example.org
Torque: 20 Ft Lbs
PN 16-180 -- Subaru, 2.0L Turbo "205" ('02 & Newer), 2.5L Turbo "255 & 257" ('04 & Newer), Turbo to Down-Pipe Gasket, 1(ea)
PN 13-013 -- Buick, V6, 2-1/4" Turbo Up-Pipe Gasket, "HUSLER HEADER" STYLE, 3.8L Eng. Code "7" ('86-'87), 3 Bolt Holes with 3" Bolt Spacing, 1(ea)
PN 18-026--Turbo BORG WARNER K44 Turbo Mount Inlet Gasket, 1 Each
PN 18-003 -- Turbo - Garrett, Greddy T25, Turbo Inlet Mounting Flange Gasket, 2-1/16" x 1-5/8" Square Port, 4 Bolt Holes with Bolt Spacing: (A) 1.562" x (B) 3.875", 1(ea)
PN 13-011 -- Buick Turbo-to-Down Pipe Gasket, V6 - 3.8L Engine Code "7" ('86-'87), 1(ea)
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Manifold / Header Gaskets