Remflex Exhaust Header / Manifold Gaskets
Help / FAQ
PN 18-008 -- Turbo - ATR 4-Bolt External Wastegate Downpipe Gasket, 2-11/16" Diameter Large Hole, 1-7/16" Diameter Small Hole, 1(ea)
Usually Ships in 24 Hours
Turbo - ATR External Wastegate Downpipe Gasket
Two Hole, 4-Bolt
2-11/16" Diameter Large Hole
1-7/16" Diameter Small Hole
INSTALLATION TIPS: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cau
Questions? 1-866-641-SEAL (7325) firstname.lastname@example.org
Torque: 20 Ft Lbs
PN 18-023--Turbo - Basic T-3 Inlet Gasket, Open Plenum 1.830"w x 2.350"h Port, 4 Bolt Holes with Bolt Spacing: (A) 1.75" x (B) 3.375", 1(ea)
PN 18-018--Turbo - Basic T-4 Inlet Gasket, Divided Plenum with two 1.375" x 2" Ports, 4 Bolt Holes with Bolt Spacing: (A) 3.25" x (B) 2.75", 1(ea)
PN 18-007 -- Turbo - HKS 50mm, Waste-Gate Inlet Gasket, 1-3/4" Diameter Port, 4 Bolt Holes with Bolt Spacing: (A) 2-21/32" x (B) 1-3/4", 1(ea)
PN 13-015 -- Buick, V6 - 3.8L Turbo-to-Down Pipe Gasket, (Open Plenum), 1(ea)
PN 18-009 -- Turbo - "Precision Turbo" 63 MM Outlet Gasket, 4 Bolt Holes with 2-9/16" Diameter Outlet Hole, 1(ea)
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Turbo Down Pipe