FORD V8 REMFLEX® 1-1/4"w x 1-5/8"h Square Port 2" Bolt Hole Spacings on each port
289, 302, 351 Windsor
For use with aftermarket Cylinder Heads - Fits GT40 For AFR Heads use PN 3083Cross Reference: Fel-Pro 1415
Cross Reference: Edelbrock 7227
Header Applications
- 1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
- If you bend them, they will break!
- 2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
- 3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
- 4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
- Questions? 1-866-641-SEAL (7325) info@remflex.com
INSTALLATION TIPS: We want you to get the most from your new Remflex exhaust gaskets. To assure your complete satisfaction, please follow these basic installation guidelines:
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
5.) Trim to fit. Excess material around the flange and/or port mouth can be trimmed with a sharp utility knife or razor blade.
Questions? 1-866-641-SEAL (7325) info@remflex.com
|
