Home > Manifold / Header Gaskets > Cummins Diesel >

PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
 
MSRP $56.29


Availability:: Usually Ships in 24 Hours
Product Code: 6017

Description Installation Tips
 
1-7/16" x 1-15/16" Square Port

(For Turbo Up-Pipe Gasket see PN 6018)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
 
5 of 5 Don't let it bend. February 15, 2014
Reviewer: Pikul Pukongking from Anchorage, AK United States  
They are not kidding. Don't bend it. This gasket is long. If you take it out of the package and hold it near the end or in the middle, just the weight of the gasket will bend it. Mine bent and almost broke but I bent it back very carefuly and it has not leaked at all. These gasket work very well. After I bent mine I cut it into 3 two port sections to make it easier to install and less likely to break again.

Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Cummins Diesel
Manifold / Header Gaskets > Mopar (Chrysler, Dodge, Eagle, Plymouth) > Inline 6
Manifold / Header Gaskets > Diesel


PN 7026 - Toyota - L6, Land Cruiser, Engine Code: "F1" (1965-1967) Set, One-Piece Comb Intake/Exhaust Gasket and 2 Riser Gaskets (use both riser gaskets for alignment if required), 3 Piece Set $56.29
PN 7024 -- Toyota V6,3.0L "3VZE" ('88-'95), Doug Thorley Headers® Specific 2/Set $42.39
PN 3082 -- Ford, V8 REMFLEX®, 460 FUEL INJECTED, SMALLER IRREGULAR SHAPED PORT, Fits only vehicles in the 1990-1992 Year Range, 2/Set $46.69
PN 2031 -- Chevrolet, Small Block, 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Round Port, Header Applications, 2/Set $39.79
PN 45-450 -- V-Band Clamp Gasket 4.50" Dim: 4.53 ID x 5.24 OD x .060 Thick 2/Set $18.49
PN 3091 -- Ford V8 Boss 302/351C Exhaust Gasket Potential fit to Speed Master® PN PCE281.1274 Aluminum Aftermarket Heads Port Size: 1.625 Wide X 1.530 Tall, 2/Set $52.99
PN 8026 -- 2-1/2" Pipe, 2 Bolt Holes, 3-1/2" Spacing, 2/Set $19.99
PN 6011 -- Mopar Hemi 5.7L ('03-'08), Hedman Header Pattern, Includes both Left & Right sides, Header Applications, 2 Pc Set $49.99
PN 6042 -- Mopar 426 Hemi Exhaust Pipe Flange Gasket Fits: 426 Hemi 1966-1971 , 2/Set $25.99