Home > Manifold / Header Gaskets > Cummins Diesel >

PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
 
MSRP $56.29


Availability:: Usually Ships in 24 Hours
Product Code: 6017

Description Installation Tips
 
1-7/16" x 1-15/16" Square Port

(For Turbo Up-Pipe Gasket see PN 6018)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
 
5 of 5 Don't let it bend. February 15, 2014
Reviewer: Pikul Pukongking from Anchorage, AK United States  
They are not kidding. Don't bend it. This gasket is long. If you take it out of the package and hold it near the end or in the middle, just the weight of the gasket will bend it. Mine bent and almost broke but I bent it back very carefuly and it has not leaked at all. These gasket work very well. After I bent mine I cut it into 3 two port sections to make it easier to install and less likely to break again.

Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Cummins Diesel
Manifold / Header Gaskets > Mopar (Chrysler, Dodge, Eagle, Plymouth) > Inline 6
Manifold / Header Gaskets > Diesel


PN 15-011 -- Nissan - Datsun L4 Special F.I.A. "L-Series" Racing Head, Combination Intake/Exhaust Manifold Gasket, 1(ea) $54.99
PN 6015B -- MOPAR V8, 318, 340, 360 "W-2" Cylinder Head OUTER (Adaptor Plate Gasket "Hedman" Pattern), 2/Set (Inner Gasket See: 6015) $56.29
PN 8065 -- 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $27.99
PN 13-002 -- Buick, V6, 3.0L ('82-'85), 3.2L ('79), 3.8L ('79-'87), 3.8L Turbo ('79-'89), 4.1L ('80-'85), 2/Set $36.29
PN 3035 -- Ford, 289, 302, 351 Windsor, Fits Cylinder Heads with 3" Bolt Spacing on each port - "Dart, Canfield, ProTop Cylinder Heads" , Header Applications, 2/Set $45.29
PN 3010 -- Ford, 429 ('68-'73), 460 ('68-'87) (Except Cobra Jet) Carbureted Engines, 2/Set $45.69
PN 4007 -- DIESEL REMFLEX® HD CATERPILLAR ENGINE Exhaust Manifold Gasket Set Port Size 2" Wide X 2-1/2" Tall (2) 25/64 Bolt Holes @ 3-1/2" Spacing Fits: #3408 ENGINE 8 Piece Set $93.99
PN 8035 -- "Air Power Systems" Down-Pipe-Back, 2-Bolt Connector Flange Gasket, 3-1/2" Pipe, with 4-3/16" Bolt Hole Spacing, 2/Set $25.49
PN 8033 -- 3-HOLE HEADER DOWN PIPE, with (3) 1-7/16" Holes,and 3 Bolt Holes, 2/Set $25.49