Home > Manifold / Header Gaskets > Cummins Diesel >

PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
PN 6017 -- Mopar L6 - 5.9L ('88-'98) Cummins Turbo Diesel 12 Valve "6BTA5.9", 1-7/16" x 1-15/16" Square Port, 1(ea)
 
MSRP $56.29


Availability:: Usually Ships in 24 Hours
Product Code: 6017

Description Installation Tips
 
1-7/16" x 1-15/16" Square Port

(For Turbo Up-Pipe Gasket see PN 6018)
Suggested Torque
  • Suggested Torque: 20 Ft Lbs.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  2 of 2 people found the following review helpful:
 
5 of 5 Don't let it bend. February 15, 2014
Reviewer: Pikul Pukongking from Anchorage, AK United States  
They are not kidding. Don't bend it. This gasket is long. If you take it out of the package and hold it near the end or in the middle, just the weight of the gasket will bend it. Mine bent and almost broke but I bent it back very carefuly and it has not leaked at all. These gasket work very well. After I bent mine I cut it into 3 two port sections to make it easier to install and less likely to break again.

Was this review helpful to you?


Browse for more products in the same category as this item:

Manifold / Header Gaskets > Cummins Diesel
Manifold / Header Gaskets > Mopar (Chrysler, Dodge, Eagle, Plymouth) > Inline 6
Manifold / Header Gaskets > Diesel


PN 45-200 -- V-Band Clamp Gasket 2.00" Dim: 2.03 ID x 2.74 OD x .060 Thick 2/Set $14.99
PN 8065 -- 4-into-ONE, 4-Bolt Connector Gasket, 2" Diameter Tubes on 2-1/8" Centers, 2/Set $27.99
PN 8058 -- 3" Hole Size, 3-Bolt Connector with 3-5/8" Bolt Hole Spacing, Fits Air Power Systems Applications, 2/Set $22.49
PN 8008 -- 2" Collector Flange, 3 Elongated/Slotted Bolt Holes with 2-11/16" to 2-15/16" Bolt Hole Spacing, 2/set $17.99
PN 8022 --2-1/8" Pipe, Ring Gasket 2-1/8" ID x 2-7/8" OD , 2/Set $15.99
PN 24-001--MERCEDES L4, Engine: 121.921 and 121.928 ('55-'63), Gasoline Engine: 121.940 ('65-'68), "Siamese Ports" with center bars (Center bars can be removed if required), Combination Intake/Exhaust Manifold Gasket, 1(ea) $49.99
PN 51-002 -- Dodge, 2.0L ('95-'03) SOHC, 1(ea) $34.99
PN 7011 -- Toyota - V8 DOHC 4.7L "2UZFE" ('98-'04 & Partial '05) Except Air Injection Engines, 1-3/4" Dia. Round Port, Header & Manifold Applications, 2/Set $49.99
PN 41-001 -- ASTON MARTIN L6/6 Cylinder Exhaust Manifold/Header Gasket Set Fits: Models "DB4", "DB5", "DB6", & "DBS6" 2pcs to Manifold (Part "A") & 2pcs to Down Pipe (Part "B") 4 Piece Set $56.49